The best solution for hydrogen fueling station.
Compressor 400 bar / 10 Nm3/h
Diaphragm oil-free compressor DC 1-10/10-400-H2 for clean Hydrogen.
Compressor for hydrogen 400 bar – 10 Nm3h
Project information:
Delivery date is 2023.09
1 piece
Description: hydrogen oil-free diaphragm compressor DC 1-10/10-400-H2 to compress the high purity hydrogen for hydrogen fueling station.
The project’s main idea: the customer develops turnkey solutions in the field of Hydrogen fueling stations.
They haven’t had any experience with Hydrogen compressors before. After some technical conversations our compressor was selected as main solution for H2 station.
Technical parameters are indicated below:
| Model | DC 1-10/10-400-H2 |
| Compressor type | Diaphragm oil-free compressor |
| Inlet pressure (bar g) | 10 |
| Outlet pressure (bar g) | 400 |
| Inlet gas temperature (°С) | -10…+40 |
| Pressure dew point (°С) | –
gas is dry |
| Capacity (Nm3/h) | 10 |
| Gas | H2 (99.9%) |
| Cooling | water |
| Cooling water temperature (°С) | + 1 … + 32 |
| Cooling water capacity (m3/h) | 0.5 |
| Cooling water pressure (bar g) | ≤ 6 |
| Ambient temperature (°С) | + 1 … + 45 |
| Motor power 400/3/50 (kW) | 5.5 |
| Real power consumption (kW) | 7.5 |
| Control panel | Included as separate unit |
| Implosion protection (by motor) | 1Exd IIC T4 |
| Dimensions LхWхH (мм) | 1450х830х1240 |
| Weight (kg) | 610 |
Compressor description
DC 1-10/10-400-H2 is oil-free diaphragm compressor for hydrogen (H2).
It’s 2 stages (2 cylinders) compressor.
Cooling: water.
More photos on the customer site are placed below:
Compressor for hydrogen 400 bar – 10 Nm3h
Gauge panel for hydrogen compressor
Drive guard
Drive guard
Compressor’s scope of supply
The following was included:
- 2 stages / 2 cylinders compressor block
- crankcase breather
- electric motor
- motor drive pulley
- v-belts
- drive guard
- inlet gas port
- baseplate with 4 holes
- manometers (6 pieces are installed on compressor + 6 pieces as spare set)
- inlet gas pressure sensor
- outlet gas pressure sensor
- crank case oil pressure sensor
- outlet gas temperature (resistance temperature detector)
- non-return valve for final gas delivery (resistance temperature detector)
- safety valve for final gas delivery
- interstage and final gas cooler
- pressure relays to control the diaphragm rapture
- tubes “inside” compressor
- terminal box
- electrical connections to terminal box “inside” compressor
- control panel as separate unit for installation in the hasardous area
- water cooling
- auto oil pressure setting in compressor
Compressor was delivered as totally assembled unit, tested and ready for the commissioning.
That’s all.
If you need compressor for hydrogen (H2) help please don’t hesitate to contact us.
You can send request and will answer during the one working day.
Best regards,
Konstantin Shirokikh
